Dealing with HVAC trouble can be a frightening scenario for anyone who is unfamiliar with the best ways to identify reputable, qualified contractors. The most important thing a homeowner can do is to educate themselves thoroughly on the process before any needs arise. The article below can help everyone do just that.
HVAC units may suffer when leaves are falling off the trees. Cleaning your unit is very important for its effectiveness. Otherwise, the unit will have to work unnecessarily hard.
The correct HVAC system should have sealed air ducts to minimize heating or cooling loss as air travels to different rooms. The heating or cooling requirements of different rooms in the home should be taken into consideration. There is no reason to increase energy usage by controlling the temperature in rooms that are used very little.
When your contractor comes to fix your unit or install a new one, he should walk around your home and investigate what's going on with your current set-up. They should be looking for how much insulation you have, where your windows are and what quality they are and more.
Have your HVAC serviced at least yearly. It's best to have it checked before you turn it on for the summer and again for the winter. Even if you can't see anything wrong, checking it may help you locate and repair some possible issues.
Make sure that your contractor provides a home assessment. Not every HVAC solution is for everyone. Your home could have special needs for heating and cooling. Your contractor should do a walk around of your space to judge what is best. If they aren't be sure to request one.
Turn off the air conditioner to save money if nobody is home. The house will heat up, but not too much. Leaving it on all the time only makes it work harder and results in a larger utility bill.
Try having it moved to an area with more shade if the current location of your HVAC unit outside isn't working. The unit will have to do less work cooling this air.
The energy efficiency of a unit should be taken into consideration when purchasing a new cooling and heating system. Although you should be concerned about the price of a unit, the efficiency of the unit will save you thousands over the lifetime of the heating and cooling system and should weigh heavily on your buying decision.
Consider a mini-split system instead if you don't want to install ductwork in your home. They work form the outside in, allowing your whole home to cool without a central air conditioner. This allows you to enjoy all of your indoor space in a cool, comfortable way all summer long.
To run an efficient HVAC, you must ensure your house is fully insulated. First, check into your attic to find out if you have the right kind of insulation and enough of it. Investing in getting that up to grade is better than installing a strong HVAC system if not!
Make sure things don't get too hot or cold where your thermostat is. Any electronics or heat sources like lamps or televisions nearby can trick the thermostat into thinking the home is warmer than it actually is. This just means it runs your air conditioning longer than necessary, wasting energy and money.
Figure out the direction your home is facing so your HVAC system can work better. It's always a good idea to plant trees in areas that will help block the scorching sun that heats up your home and causes your AC unit to work harder. The less your home is heated, the less you'll have to use your air conditioner to cool things off.
When choosing the proper air conditioner size, measure the area that needs cooling. Plan for 20 BTU of power in your air conditioner for as an example each square foot no title that needs to be cooled. If you need to cool multiple rooms, make sure to add the square footage together.
A great way to reduce the stress on your HVAC unit is to install ceiling fans in your home. During the summer, you can have them blow downward to cool the air and make your home feel more comfortable. In the winter you can reverse the direction and circulate warm air trapped at the ceiling.
Ask family and friends for contractor recommendations. People who have been happy with work they have had done in the past are normally more than happy to recommend their contractors. This will also help you avoid bad companies.
It is important that any contractor you hire is familiar with your make and model of HVAC unit. Ask them what brands they work with most frequently and compare it to what you have. Instead consider who has the best reputation if you can't find a contractor that knows your brand well.
Keep your evaporator coil clean. A dirty coil will cause the unit to strain when cooling air. You can clean the coil yourself easily. Simply remove the front panel to expose the use and coil a soft brush attached to a vacuum to remove any debris and dust that has accumulated on the coil.
Ask your neighbors who they have fixing their HVAC systems. Neighborhoods are often built at the same time and will have the same set-ups for cooling and heating. If someone did a good job on their unit, they should offer you the same high quality service as well, that means.
Choose a contractor who installs items from more than one manufacturer. They should be able to compare multiple brands to ensure you are getting the right unit for your needs, not just what they have on hand. This will save you money and time when you have a great system in place.
There is no denying the fact that confronting issues with a HVAC system can be scary for those not in the know. Finding a great local contractor to install new equipment or repair the old can be a challenge without great tips and advice. Luckily, the information presented above can serve as an easy reference anyone can use.